Table of Contents
Advertisement
Configuring CoS Queueing and Scheduling
The CoS Queuing & Scheduling Page provides fields for configuring CoS Priority to Egress Queues and for
defining Egress Weights. The queue settings are set system-wide.
To define schedule and queue settings for Quality of Service:
1.
Click Services > Queuing & Scheduling. The CoS Queuing & Scheduling Page opens:
Figure 119: CoS Queuing & Scheduling Page
The CoS Queuing & Scheduling Page contains scheduling and Priority Queue settings for the defined CoS and
DSCP and contains the following fields:
•
Select Schedule — Defines the priority method in queuing.
–
Strict Priority — Indicates that traffic scheduling for the selected queue is based strictly on the queue
priority.
–
Weighted Priority — Indicates that traffic scheduling for the selected queue is based strictly on the
Weighted Priority.
•
Configure Priority to Egress Queues — Maps CoS (VPT tag) or DSCP values to a queue (1-4).
–
Configure CoS — Maps CoS priority to a queue.
–
Configure DSCP — Maps DSCP priority to a queue.
2.
Select a schedule type.
3.
Click Apply. The configuration is saved and the device is updated.
4.
Click Save Config on the menu to save the changes permanently.
Page 156
Configuring Services
Advertisement
Table of Contents
