Preface; Web Browser Interface User's Guide Overview - Allied Telesis AT-S94 User Manual

Layer 2 ethernet switch
Hide thumbs Also See for AT-S94:
Table of Contents

Advertisement

Preface

This guide contains instructions on how to configure an AT-S95 Series Layer 2+ Gigabit Ethernet Switch using the
interface in the Embedded Management System (EWS).
The Embedded Management System enables configuring, monitoring, and troubleshooting of network devices
remotely via a web browser. The web pages are easy-to-use and easy-to-navigate.
This preface provides an overview of the Web Browser Interface User's Guide, and includes the following
sections:

Web Browser Interface User's Guide Overview

Intended Audience
Web Browser Interface User's Guide Overview
The Web Browser Interface User's Guide provides the following sections:
Section 1,"Getting Started" — Provides information for using the Embedded Web Management System,
including adding, editing, and deleting configurations.
Section 2, "Defining System Information" — Provides information for defining basic device information.
Section 3, "Configuring System Time" — Provides information for configuring Daylight Savings Time and
Simple Network Time Protocol (SNTP).
Section 4, "Configuring Device Security" — Provides information for configuring both system and network
security, including traffic control, and switch access methods.
Section 5, "Configuring DHCP Snooping" — Provides information for enabling and defining DHCP
Snooping configurations and trusted interfaces.
Section 6, "Configuring Ports" — Provides information for configuring ports, port aggregation, port
mirroring and LACP.
Section 7, "Configuring Interfaces" — Provides information for defining ports, LAGs, and VLANs.
Section 8, "Configuring System Logs" — Provides information for setting up and viewing system logs, and
configuring switch log servers.
Section 9, "Configuring Spanning Tree" — Provides information for configuring Classic, Rapid, and
Multiple Spanning Tree.
Section 10, "Configuring Multicast Forwarding" — Provides information for configuring both the static and
dynamic forwarding databases.
Section 11, "Configuring SNMP" — Provides information for configuring SNMP access and management.
Section 12, "Configuring Power Over Ethernet" — Provides information for configuring Power over
Ethernet (PoE) on the device.
Section 13, "Configuring Services" — Provides information for configuring Quality of Service CoS
parameters.
Section 14, "System Utilities" — Provides information for managing system files.
Section 15, "Viewing Statistics" — Provides information about viewing device statistics, including Remote
Monitoring On Network (RMON) statistics, and device history events.
Web Browser Interface User's Guide Overview
Page 7
Preface

Advertisement

Table of Contents
loading

Table of Contents