Table of Contents
Advertisement
•
Authentication — Displays the method used to authenticate users. The possible field values are:
–
MD5 Key — Users are authenticated using the HMAC-MD5 algorithm.
–
SHA Key — Users are authenticated using the HMAC-SHA-96 authentication level.
–
MD5 Password — The HMAC-MD5-96 password is used for authentication. The user should enter a
password.
–
SHA Password — Users are authenticated using the HMAC-SHA-96 authentication level. The user
should enter a password.
–
None — No user authentication is used.
2.
Click Add. The Add SNMP User Page opens.
Figure 106:Add SNMP User Page
In addition to the SNMP Users Page, the Add SNMP User Page contains the following fields:
•
Authentication Method — Defines the SNMP Authentication method. The possible field values are:
–
MD5 Key — Users are authenticated using the HMAC-MD5 algorithm.
–
SHA Key — Users are authenticated using the HMAC-SHA-96 authentication level.
–
MD5 Password — The HMAC-MD5-96 password is used for authentication. The user should enter a
password.
–
SHA Password — Users are authenticated using the HMAC-SHA-96 authentication level. The user
should enter a password.
–
None — No user authentication is used.
•
Password — Define the local user password. Local user passwords can contain up to 42 characters for MD5
or 32 characters for SHA. This field is available if the Authentication Method is a password.
Page 139
Configuring SNMP
Advertisement
Table of Contents
