Table of Contents
Advertisement
Figure 59: Port Trunking Configuration Page
In addition to the fields in the The Port Trunking Page, the Port Trunking Configuration Page contains the following
additional field:
•
Unit Number — Displays the stacking member for which the port trunking parameters are defined.
•
LACP — Indicates if LACP is enabled on the trunk. The possible field values are:
–
Checked — Enables LACP on the trunk.
–
Unchecked — Disables LACP on the trunk. This is the default value.
4.
Modify the Trunk, LACP, Unit Number, and Trunk Name fields.
5.
Select the ports for the trunk from the Port List using the
Trunk Members.
6.
Click Apply. Trunking information is modified and the device is updated.
7.
Click Save Config in the Trunk Settings Page menu to permanently save the changes.
arrow. The selected ports are displayed as
Page 87
Configuring Ports
Aggregating Ports
Advertisement
Table of Contents
