Table of Contents
Advertisement
5.
Enter the "copy" command to download the system file.
Console# copy tftp://172.16.101.101/file1.ros unit://3/image
Accessing file 'file1' on 172.16.101.101...
Loading file1 from 172.16.101.101:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
09-Jul-2006 03:22:27 %COPY-W-TRAP: The copy operation was completed successfully
!
Copy: 6720861 bytes copied in 00:05:00 [hh:mm:ss]
6.
Reboot the devices being updated. The allocated devices boot up with the updated boot and system files.
Copying Software from the Stacking Master to a Stacking Member
To copy the software from the Stacking Master to a specified Stacking Member, number 4 in this example, perform
the following:
1.
Download the software to the Stacking Master as previously described, using the Stacking Member number 1
instead of number 3, as per the previous example.
2.
Enter the "copy" command to copy the software from the Stacking Master to the Stacking Member. To copy
the software from the Stacking Master to all the Stacking Members, use the "*" character instead of the
Stacking Member number, number 4 in this example.
Console# copy unit://1/image unit://4/image
3.
Reboot the devices being updated. The allocated devices boot up with the updated boot and system files.
Page 195
Downloading Software with CLI
Downloading Software
Advertisement
Table of Contents
