Table of Contents
Advertisement
–
Fault — Indicates one of the following:
–
The powered device test has failed. For example, a port could not be enabled and cannot be used to
deliver power to the powered device.
–
The device has detected a fault on the powered device. For example, the powered device memory
could not be read.
–
Test — Indicates the powered device is being tested. For example, a powered device is tested to confirm
it is receiving power from the power supply.
3.
Modify the Admin Mode and Priority Level fields.
4.
Click Apply. The PoE settings are saved and the device is updated.
5.
Click Save Config on the menu, to save the settings permanently.
Page 152
Configuring Power Over Ethernet
Advertisement
Table of Contents
