To add a mapped group:
1.
Click Layer 2 > MAC Based Groups. The MAC Based Groups Page opens:
2.
Below the Mapping Group table, click the Add button. The Add MAC Address Group Mappings Page opens:
Figure 75: Add MAC Address Group Mappings Page
In addition to the fields in the MAC Based Groups Page, the Add MAC Address Group Mappings Page contains
the following additional fields:
•
Group Type – Indicates the VLAN Group to which interfaces are mapped. The possible field value is:
–
MAC-based – Indicates that interfaces are mapped to MAC based VLAN groups.
3.
Select a VLAN to map with the group (VLAN ID).
4.
Click Apply. The mapping group is added, and the device is updated.
To modify mapping group settings:
1.
Click Layer 2 > MAC Based Groups. The MAC Based Groups Page opens:
2.
Click Modify. The MAC Address Group Mappings Configuration Page opens.
Figure 76: MAC Address Group Mappings Configuration Page
3.
Change the mapped VLAN (VLAN ID).
4.
Click Apply. The mapping group is modified, and the device is updated.
Page 102
Configuring Interfaces
Defining MAC Based Groups