CyberData 011098A Operation Manual page 18

2.2.1.3 Running the V2 Speaker with Auxiliary Power
In Figure
from an external source.
Operations Guide
2-3, the power for the V2 Speaker can either come from an 802.3af Network connection or
Caution
Operational Note: Do not connect an auxiliary power supply when the V2
Speaker is connected to a PoE power source through J1. Improper operation or
equipment damage may occur.
GENERAL ALERT
Figure 2-3. Running the V2 Speaker with Auxiliary Power
+12 VDC
GND
AC adaptor
+12 VDC @ 1 Amps
(UL-listed, LPS-rated)
Speaker
AUX POWER (+)
(+12VDC @ 1A)
AUX POWER (-)
RELAY COM
RELAY NO
+5V OUT
J10
930274I
Installing the VoIP V2 Speaker
Device Configuration
AUX SPEAKER (-)
AUX SPEAKER (+)
GND
LINE OUT (-)
LINE OUT (+)
J9
CyberData Corporation
11