Confirm The Ip Address And Test The Audio - CyberData 011098A Operation Manual

2.2.4 Confirm the IP Address and Test the Audio

2.2.4.1 Reset Test Function Management (RTFM) Switch
When the speaker is operational and linked to the network, use the Reset Test Function
Management (RTFM) switch
IP Address and test that the audio is working.
Note
To announce a speaker's current IP address, press and release the RTFM switch within a five second
window.
Note
Note
Operations Guide
(Figure
Using the RTFM switch will lock the digital volume level to 4 and disable the analog
volume control dial.
The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
Pressing and holding the RTFM switch for longer than five seconds will restore the speaker
to the factory default settings.
930274I
2-9) on the speaker face to announce and confirm the speaker's
Figure 2-9. RTFM Switch
Installing the VoIP V2 Speaker
Device Configuration
RTFM switch
CyberData Corporation
17