Showing Content With People+Content™ Ip - Polycom HDX Series User Manual

Showing Content with People+Content™ IP
© Polycom, Inc.
People+Content IP allows you to send content from a computer that is not
connected directly to the Polycom HDX system.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
• People+Content must be enabled on the Polycom HDX system.
• The People+Content IP option must be installed.
To install People+Content IP on a computer:
1. On a computer with a Microsoft® Windows® XP, Windows 2000, or
Windows Vista operating system, open a web browser and go to the
Polycom web site at www.polycom.com/support.
2. Navigate to your product page.
3. Download and install the People+Content IP software.
To start showing content:
1. On the computer, start the Polycom People+Content IP application.
2. Enter the IP address or DNS host name of your video conferencing
system and the meeting password, if one is set.
3. Click Connect.
4. Open the content you want to show, and do one of the following:
— Click in People+Content IP.
— Press Content on the video conferencing system's remote control.
To stop showing content:
1. If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2. Do one of the following:
— Click in People+Content IP.
— Press Content on the video conferencing system's remote control.
To keep the call secure, content is automatically stopped when a participant joins or
disconnects from the call.
User's Guide for Polycom HDX Room Systems
15