Showing Content From A Computer Connected Directly To The System - Polycom HDX Series User Manual

User's Guide for Polycom HDX Room Systems

Showing Content from a Computer Connected Directly to the System

16
Before you show content, check that the computer video is configured to use
one of these supported resolutions and refresh rates:
Resolution
800 x 600
1024 x 768
1280 x 720
1280 x 1024
To set the resolution and refresh rate, go to your computer's Display Control Panel.
To start showing content:
1. Make sure the computer is connected and powered on.
You can connect a computer to video input 4 or 5 on a Polycom HDX
9004™; video input 4 on a Polycom HDX 9002, Polycom HDX 9001, or
Polycom HDX 8000 HD; or video input 3 on a Polycom HDX 7000 series
system. When you connect to video input 4 on a Polycom HDX 9004 or
Polycom HDX 8000 HD system, you can also connect to audio input 4 to
share sound from your computer. When you connect to video input 3 on
a Polycom HDX 7000 series system, you can also connect to audio input 3
to share sound from your computer.
2. Press Content on the remote control or press
the computer input.
Audio from the content input is muted unless the content input is selected
as a video source.
To stop showing content:
Press Content on the remote control or press
the main camera.
Refresh rates (Hz)
60, 72, 75
60, 70, 75
50, 60
60
Camera and select
Camera and select
© Polycom, Inc.