Showing Content With People+Content™ Ip - Polycom HDX 4000 User Manual

Showing Content with People+Content™ IP
Polycom, Inc.
To stop sending content, select one of the following options:
— Press the
— Press Content on the remote control.
People+Content™ IP allows you to send content from a computer that is not
connected directly to the Polycom HDX system.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
• Your computer resolution can be set to anything, but People+Content IP scales
the image to 1024x768 or 1280x720.
• The People+Content IP application must be installed on a computer.
• For a computer connected directly to the Polycom HDX system, Polycom
recommends using the
button instead of People+Content IP.
To install People+Content IP on a computer:
On a computer with a Microsoft® Windows XP, Windows Vista, or
1
Windows 7 operating system, open a web browser and go to
www.polycom.com/ppcip.
Download and install the People+Content IP software.
2
To start showing content:
On the computer, start the Polycom People+Content IP application.
1
Enter the IP address or host name of the Polycom HDX system and the
2
meeting password, if one is set.
On the computer, click Connect.
3
Open the content you want to show, and click
4
If you are using multiple screens on your computer, move the People+Content IP
icon to the screen you want to share.
User's Guide for Polycom HDX Desktop Systems
Send Computer button on the keypad.
Send Computer button or Content
in People+Content IP.
21