3
5
Select the type of paper
to be loaded.
6
Touch [Enter].
To set a non-standard (custom) paper size
Non-standard-sized paper can be loaded into the 1st drawer or the bypass tray.
If non-standard-sized paper is loaded, it will be necessary to enter the paper size.
The following procedure describes how to specify the size of non-standard paper
loaded into the 1st drawer.
1
Touch [Paper/Size].
A screen appears, showing the available Paper/Size settings.
2
Touch the key for the 1st drawer, and then touch [Change Size].
❍
For the bypass tray, touch [Bypass].
The Size Input screen appears.
3
Touch [Custom Size].
The Custom Size
screen appears.
4
Make sure that [X] is selected.
5
Using the keypad, type in the length of side X.
The entered length of side X appears.
3-22
3.6 Selecting a Paper/Size Setting
C350