Zoom; Copying In 1.000 Magnification Mode - Konica Minolta bizhub PRO 950 User Manual

9
9.5

Zoom

In the initial settings on the Copy Screen, the magnification is automatically
set at 1.000 (full size).
This section describes how to change the magnification ratio.
9.5.1

Copying in 1.000 Magnification Mode

Follow this procedure to make a 100% copy of the original image.
Procedure
1
Close the ADF securely, and then press [Reset] on the control panel.
– The initial setting will be restored. Check that [×1.0] is highlighted
to indicate that the 1.000 magnification is automatically selected.
2
Select additional copy conditions, as desired.
– Specifying paper size will release 1.000 magnification and set Auto
Zoom automatically. In this case, touch [×1.0] to highlight it again.
!
Detail
The initial setting may be altered in the Utility mode. Details can be re-
ferred in POD Administrator's Reference.
9-26
Basic Job Settings
bizhub PRO 950