Home Position Adjustment - ACME DVS-2500 User Manual

All—Reset All
Select All, press ENTER button to confirm, press UP/DOWN button to select Yes (the
unit will run built-in program to reset all motors to their home positions) or No, press
ENTER button to store. Press MENU button to exit.
Attention: The lamp will not be on until detected temperature is lower than 45
Special Functions
Enter menu mode, select Special Functions, press ENTER button to confirm, press
UP/DOWN button to select Fixture Maintenance or Factory Setting.
Fixture Maintenance
Select Fixture Maintenance, press ENTER button to confirm, press UP/DOWN button
to select Interval or Remain Time.
Interval
Select Interval, press ENTER button to confirm, the interval time will show on
the display. Press MENU button to exit.
Remain Time
Select Remain Time, press ENTER button to confirm, the remaining time will
show on the display, press ENTER button to confirm, press UP/DOWN button to
select Exit or Reset time, press MENU button to exit.
Factory Setting
Select Factory Setting, press ENTER button to confirm, press UP/DOWN button to
select Yes (the fixture will reset to factory settings) or No, and press ENTER button to
store. Press MENU button to exit.

6.3. Home Position Adjustment

Press MENU button into menu mode, then hold ENTER button for about 3 seconds into
offset mode to adjust the home position. Select the function by ENTER button. Use
UP/DOWN button to choose the submenu, press the ENTER button to store and
automatically return to the last menu. Press MENU button to exit.
DVS-2500
C.
°
24-