ACME DVS-2500 User Manual page 24

DVS-2500
Lamp On Time
Select Lamp On Time, press ENTER button to confirm, lamp on time will show on the
display, press ENTER button to confirm, press UP/DOWN button to select Exit or
Reset Time, press ENTER button to confirm. Press MENU button back to the last
menu or exit menu mode let the unit idle one minute.
Exit
Select Exit, press ENTER button will back to the last menu or exit menu mode
let the unit idle one minute.
Reset Time
Select Reset Time, press ENTER button to confirm, and the lamp on time will
clear to 0.
Firmware Version
Select Firmware Version, press ENTER button to confirm, firmware version will show
on the display, press MENU button back to exit.
Reset Functions
Enter menu mode, select Reset Functions, press ENTER button to confirm, press
UP/DOWN button to select Pan&Tilt,, Shutter, Focus, or All.
Pan/Tilt—Reset Pan/Tilt
Select Pan/Tilt, press ENTER button to confirm, press UP/DOWN button to select Yes
(the unit will reset pan and tilt to their home positions) or No, press ENTER button to
store. Press MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
Shutter—Reset Shutter
Select Shutter, press ENTER button to confirm, press UP/DOWN button to select Yes
(the unit will run built-in program to reset shutter to its home positions) or No, press
ENTER button to store. Press MENU button to exit.
Focus—Reset Focus
Select Focus, press ENTER button to confirm, press UP/DOWN button to select Yes
(the unit will run built-in program to reset Focus to home positions) or No, press ENTER
button to store. Press MENU button to exit.
23-