Home Position Adjustment; Control By Universal Dmx Controller; Connection - ACME Solaris CM-S6 User Manual

4.2 Home Position Adjustment

Press the MENU button into menu mode, then press the ENTER button for about 3 seconds into offset
mode to adjust the home position. Select the function by the ENTER button. Use the UP/DOWN
button to choose the submenu, press the ENTER button to store and automatically return to the last
menu. Press MENU button to exit.
Offset Menu

5. Control By Universal DMX Controller

5.1 Connection

Termination reduces signal errors and to avoid signal transmission problems and
interference. It is always advisable to connect a DMX terminal (Resistance 120 ohm 1/4W
1. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120-ohm 1/4W resistor
between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the
between pin2 (DMX-) and pin3 (DMX+) of the last fixture).
Pan
Tilt
ATTENTION
12F