ACME DVS-2500 User Manual page 22

DVS-2500
On If DMX On— Lamp turns on when DMX signal is detected
Select On If Dmx On, press ENTER button to confirm, present mode will blink on the
display, press UP/DOWN button to select Yes (Lamp turns on when DMX signal is
detected) or No (Lamp off when DMX signal is detected), press ENTER button to store.
Press MENU button back to the last menu or let the unit idle one minute to exit menu
mode (If the lamp is off via DMX signal, you can reconnect the DMX controller to make
the lamp on).
Off If DMX Off— Lamp turns off when DMX signal is cut off
Select Off If Dmx Off, press ENTER button to confirm, present mode will blink on the
display, press UP/DOWN button to select Yes (Lamp turns off when DMX signal is cut
off) or No (Normal), press ENTER button to store. Press MENU button back to the last
menu or let the unit idle one minute to exit menu mode.
Ignition Delay—Delay time between power on and lamp on
Select Ignition Delay, press ENTER button to confirm, present mode will blink on the
display, press UP/DOWN button to adjust the delay time from 0S to 255S, press
ENTER button to store. Press MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Display Setting
Enter menu mode, select Display Setting, press ENTER button to confirm, press
UP/DOWN button to select Display Direction, Backlight Auto Off, Backlight
Intensity or Temperature unit.
Display Direction
Select Display Direction, press ENTER button to confirm, present mode will blink on
the display, press UP/DOWN button to select Normal, Inverse or Auto(Adjust
automatically display direction) press ENTER button to store. Press MENU button back
to the last menu or let the unit idle one minute to exit menu mode.
Backlight Auto Off
Select Backlight Auto Off, press ENTER button to confirm, present mode will blink on
the display, press UP/DOWN button to select No (display always on) or Yes (display
goes off one minute after exiting menu mode), press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
21-