ACME DVS-2500 User Manual page 23

Backlight Intensity
Select Backlight Intensity, press ENTER button to confirm, present mode will blink on
the display, press UP/DOWN button to adjust backlight intensity from 1 (darkest) to 10
(brightest), press ENTER button to store. Press MENU button back to the last menu or
let the unit idle one minute to exit menu mode.
Temperature Unit
Select Temperature Unit, press ENTER button to confirm, present mode will blink on
the display, press UP/DOWN button to select ℃ or ℉, press ENTER button to store.
Press MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
Fixture Test
Enter menu mode, select Fixture Test, press ENTER button to confirm, press
UP/DOWN button to select Auto Test or Manual Test
Auto Test
Select Auto Test, press ENTER button to confirm, the unit will run built-in programs to
automatically test pan, tilt, shutter, focus. Press MENU button back to the last menu or
exit menu mode after auto test.
Manual Test
Select Manual Test, press ENTER button to confirm, the present channel will show on
the display, press UP/DOWN button to select channel, press ENTER button to confirm,
then press UP/DOWN button to adjust the value, press ENTER button to store, the
fixture will run as the channel value selected. Press MENU button back to the last menu
or exit menu mode let the unit idle one minute.
(All channels value will become 0 after exiting Manual Test menu)
Fixture Information
Enter menu mode, select Fixture Information, press ENTER button to confirm, press
UP/DOWN button to select Fixture Use Time, Lamp On Time or Firmware Version.
Fixture Use Time
Select Fixture Use Time, press ENTER button to confirm, fixture used time will show
on the display, press MENU button to exit.
DVS-2500
22-