Home Position Adjustment - ACME AE-610 BEAM User Manual

Reset
To select Reset, press the ENTER button and all channels of the unit will return to their standard
position.

4.2 Home Position Adjustment

Press the MENU button for at least 3 seconds then press the ENTER button for at least 5 seconds
into offset mode to adjust the home position for the motors. Use Up and Down button to adjust
the value, press the ENTER button to setup. Back to the functions without any change press MENU
button.
PAN OFFSET —Pan home position adjustment
To select the Pan Offset, press the ENTER button to show the PAN OFFSET on the display. Use
the DOWN and UP button to adjust the value from -127 to 127, press the ENTER button to store.
Press the MENU button to exit.
TILT OFFSET —Tilt home position adjustment
To select the Tilt Offset, press the ENTER button to show the TILT OFFSET on the display. Use
the DOWN and UP button to adjust the value from -127 to 127, press the ENTER button to store.
Press the MENU button to exit.
DIMMER OFFSET —Dimmer home position adjustment
To select the Dimmer Offset, press the ENTER button to show the DIMMER OFFSET on the
display. Use the DOWN and UP button to adjust the value from 0 to 255, press the ENTER button
to store. Press the MENU button to exit.
COLOR OFFSET —Color home position adjustment
10A