Fixture Settings - ACME DVS-2500 User Manual

DVS-2500
Standby Settings
Enter menu mode, select Stand Settings, press ENTER button to confirm, press
UP/DOWN button to select Standby Mode or Eidt Standby Scene
to store. Press MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
Standby Mode
Select Standby Mode, press ENTER button to confirm, press UP/DOWN button to
select Keep (When the DMX signal is cut off, the fixture will remain on its last status.)
or Scene (You can edit your own scene for the Standby Mode, when the DMX signal is
off, the fixture will remain on the scene that you edited), and press ENTER button to
store. Press MENU button back to the last menu or let the unit idle one minute to exit
menu mode.

Fixture Settings

Enter menu mode, select Fixture Settings, press ENTER button to confirm, press
UP/DOWN button to select Pan Inverse, Tilt Inverse, BL.O. P/T Moving, or Image
Auto Inverse.
Pan Inverse
Select Pan Inverse, press ENTER button to confirm, present mode will blink on the
display, press UP/DOWN button to select No (normal) or Yes (pan inverse), press
ENTER button to store. Press MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Tilt Inverse
Select Tilt Inverse, press ENTER button to confirm, present mode will blink on the
display, press UP/DOWN button to select No (normal) or Yes (tilt inverse), press
ENTER button to store. Press MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
BL.O. P/T Moving—Blackout while pan/tilt moving
Select BL.O. P/T Moving, press ENTER button to confirm, present mode will blink on
the display, press UP/DOWN button to select No (normal while pan/tilt moving) or Yes
(blackout while pan/tilt moving), press ENTER button to store. Press MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
19-
press ENTER button
,