Select Additional Copy Conditions, As Desired; Press [Start] On The Control Panel; Press [Start] - Konica Minolta bizhub Pro C6500 User Manual

Application Functions
6
Touch [OK] to complete the setting.
– To restore the previous setting, touch [Cancel].
– To release the Book Copy function with the current setting re-
mained, touch [Function Off].
7
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with highlighted [Book Copy] key
displayed under the [Application] key.
Use this key to jump to the subsequent screen to make any setting
change.
The [Separate Scan] key on the Copy Screen also appears highlighted
to show that the Separate Scan mode is automatically selected.
8

Select additional copy conditions, as desired.

– Available paper sizes are A4 v, B5 v, and 8.5" × 11" v.
– Auto Zoom and Auto Paper Select are released and ×1.0 magnifi-
cation is selected automatically.
– Be sure not to select [Top] as binding direction on the Output Ap-
plication Screen.
9

Press [Start] on the control panel.

– Scanned image will be stored into memory. Repeat this procedure
to complete scanning all originals.
– When scanning from the original glass, Non-Image Area Erase and
Image Centering are automatically selected.
Be sure to keep the ADF open throughout the scanning job.
10
When all originals are scanned, touch [Separate Scan] to exit the Sep-
arate Scan mode.
11
Enter the desired print quantity from the control panel keypad, then

press [Start].

The machine will start printing when ready for output.
bizhub PRO C6500
11
11-33