Options - Konica Minolta bizhub 42 Quick Manual

1
1.22

Options

This section describes the configuration of the options installed on this machine.
By adding options, various office needs can be satisfied.
No. Name
1 ADF
2 Authentication Unit AU-201
3 Working Table WT-510
4 Main unit
5 Desk DK-511
6 Paper Feed Cabinet PC-211
7 Mount Kit MK-601
8 Finisher FS-529
No illustration is provided as the options are built into the main body.
9 Fax Kit FK-509
d
Reference
For details, refer to chapter 2 of the [User's Guide Copy Operations].
1-56
8
7
6
1
4
5
Description
Originals are automatically fed one by one and
scanned. Duplex originals are automatically reversed
and scanned. Up to 50 pages of originals can be load-
ed on the ADF at a time. In addition, the stack of the
sheets must not exceed the upper limit indicated by
the , mark. Otherwise, original jam, original damage,
or machine trouble may be caused. However, an orig-
inal that exceeds 50 pages can be scanned in separate
batches.
Performs user authentication by scanning information
recorded on the IC card.
The Working Table WT-510 is required to install the
Authentication Unit AU-201.
Provides an area to temporarily place an original or
other materials. This is also used when the Authentica-
tion Unit AU-201 is installed.
The original is scanned by the scanner section, and the
scanned image is printed by the printer section. The
main unit is hereinafter referred to as "the machine",
"this machine", "main unit", or bizhub 42/36 through
the manual.
By using the Desk, you can install this machine on the
floor.
Allows you to load up to 500 sheets respectively in the
top and bottom trays.
Required when installing the Finisher FS-529.
Install this unit onto the output tray of the main unit to
sort, group or staple printed paper before feeding out.
Allows this machine to function as a fax machine.
Options 1.22
2
3
bizhub 42/36