Minolta Di150f User Manual page 140

Table of Contents

Advertisement

Maintenance and Trouble-Shooting
Message
Close 1st cassette
Close 2nd cassette
Jam in 1st Cassette
Jam in 2nd Cassette
Jam in Tray
Check paper / Cover
open?
Close Scanner Cover
Communication error
No Number Stored
Invalid Number
Too Many Characters
Hang Up Phone
No Report
Enter No. (01-32)
Enter No. (1-99)
No Document Stored
No Command
No Command Stored
All Commands In Use
Di 150f
Problem
The side cover of the 1st cas-
sette is not closed properly.
The side cover of the 2nd cas-
sette is not closed properly.
Print paper jam in 1st cassette.
Print paper jam in 2nd cassette.
Print paper jam in the multi pur-
pose tray.
Paper jam in all paper cassettes
The ADF is open.
The communication was not
successful.
There is no number stored in this
key.
The key pressed has no function
programmed or the fax number
was entered incorrectly.
Too many numbers or charac-
ters were entered.
The receiver of the connected
telephone is off hook.
The desired report cannot be
printed because the correspond-
ing process was not carried out.
The group dial number entered
is higher than 32. The machine
can store up to 32 group dial
numbers.
The number for copies to be
made is higher than 99.
No document can be printed be-
cause the memory is empty.
The list of commands cannot be
displayed because no com-
mands are programmed.
The list of reservation cannot be
displayed because no reserva-
tions are programmed.
All 70 storage places for com-
mands are occupied.
Solution
Close the cover firmly.
Close the cover firmly.
Follow the instructions given
earlier in this chapter.
Follow the instructions given
earlier in this chapter.
Follow the instructions given
earlier in this chapter.
Follow the instructions given
earlier in this chapter.
Close the ADF cover.
STOP
Press
and try to send
again or ask the remote side to
send again.
Press the correct key.
Press the key with the desired
function or enter the fax number
again.
CLEAR ALL
Press
to delete
the superfluous numbers or
characters.
Place the receiver on the hook.
After the process has been car-
ried out, the report can be print-
ed.
Enter the correct number. (00 is
valid for all group dial numbers.)
Enter the correct number of cop-
ies. (up to 99 copies from one
original are possible).
Printing is possible after a docu-
ment is stored in memory.
After commands have been
stored, they can be displayed.
After reservations have been
stored, they can be displayed.
COMM.CLR.
Press
to delete
unnecessary commands. Or
wait until the machine has car-
ried out a command.
9
9-139

Advertisement

Table of Contents
loading

Table of Contents