Placing Originals; Using The Automatic/Duplexing Document Feeder - Minolta EP4000 Operator's Manual

26

2. Placing Originals

Using the Automatic/Duplexing Document Feeder

The Automatic/Duplexing Document Feeder automatically feeds in sheet originals placed on the
Document Feed Tray one by one. After the copy cycle has been completed, it automatically
ejects the original onto the Document Exit Tray.
Some originals may not be suitable for reliable operation of the Document Feeder. Here is a
guideline.
Originals Suitable for the Automatic/Duplexing Document Feeder
Type of Originals: Sheets (Plain paper)
Normal mode
Lightweight Original Detection Mode (40 g/m
Original Size: 1-Sided Original, 2-Sided Original, Mixed Original Detection Mode
2-in-1 (Dual Original Scanning) mode : A4C
Lightweight Original
Be sure to use the User's Choice to turn ON the Lightweight Original Mode when making copies
from the lightweight originals.
For a lightweight original (40g/m
Original Glass or to make copies using the SADF Mode. (Single Automatic Document Feeding
Mode). p. 28
Originals Not Suitable
Typing paper, paraffin paper, and other thin paper
Thick paper
Originals greater than A3L or smaller than A5L
Transparencies, translucent paper
Wrinkled, dog-eared, curled, or torn originals
Clipped or stapled originals
Carbon-backed originals
Typing paper,
paraffin paper,
and other thin
paper
For any of these types of originals, place the original manually on the Original Glass to make a
p. 29
copy.
1-Sided Original (50 g/m
2-Sided Original (60 g/m
Mixed Original Detection Mode (60 g/m
A3L, B4L, A4L, A4C, 210mm
A5L (Except for Mixed Original Detection Mode)
p. 86
2 2
to 50g/m
Thick paper
2 2
to 110 g/m )
2 2
to 90 g/m )
2
to 90 g/m
2
to 110 g/m
330mm
), it is recommended to place it directly onto the
Continuous
forms
Wrinkled or
dog-eared
original
2
)
2
)
Stapled
originals
1134O073AA