Minolta Di150f User Manual page 144

Maintenance and Trouble-Shooting
Error code
R.4.2
R.4.4
R.5.1,R.5.2
R.8.1
R.8.10
Communication error
T.1.1
T.1.2
T.1.4
T.2.1
T.2.2
T.2.3
T.3.1
T.3.2
T.4.1
T.4.2
T.4.4
T.5.1, T.5.2, T.5.3
T.8.1
Di 150f
Problem
The communication was inter-
rupted or an error occurred at
the transmitting location.
The memory capacity is exceed-
ed.
Line noise made ECM mode re-
ception impossible.
The machines are incompatible.
No line check was possible due
to line noise.
The other location does not re-
spond.
The page counter detected a
feeding error.
STOP
was pressed during the
handshake.
The communication was inter-
rupted or the line quality was too
bad for transmission.
The fax machines were incom-
patible. This is a group 3 ma-
chine.
Transmission was impossible
due to bad line quality.
The page counter detected a
feeding error during transmis-
sion.
The machine did not detect a
pause after closing the commu-
nication line.
The communication was inter-
rupted because too many errors
occurred or because there was
no paper in the receiving ma-
chine.
After the beginning of the trans-
mission the line quality dropped.
Transmission was impossible
due to bad line quality.
Line noise made ECM mode
transmission impossible.
The fax machines were incom-
patible.
Solution
---
---
---
Contact the other location by tel-
ephone.
Insert the document into the
ADF and restart the transmis-
sion.
Try to send again.
Retry the transmission.
Contact the other location by tel-
ephone.
Retry the transmission.
Insert the document into the
ADF and restart the transmis-
sion.
Retry the transmission.
Retry the transmission.
Retry the transmission.
Retry the transmission.
Retry the transmission.
9
9-143