Safety Precautions - Minolta Di150f User Manual

1
1.4

Safety Precautions

l Connect the machine only to a 200 - 240 V/ 50 Hz earthed power point.
l Make sure the power is not turned off over night.
l Always pull at the plug, never at the wire, when you want to disconnect
the machine from the power supply. Make sure you do not cause
damage to the wire.
l If unusual noise, smell or smoke appear while using the machine, pull
the plug immediately out of the wall socket.
l Never place objects on the maschine or on its cable.
l Do not place the machine close to magnetic fields. Do not place flam-
mable gases or liquids close to the machine.
l To facilitate communication always keep the machine switched on and
program the correct user data. Make sure to enter the correct user
names.
l Do not unscrew any parts, if not specifically requested in this manual.
If necessary contact your technical service.
l Never open the machine while it is transmitting or printing.
l Take care not to let humidity into the machine.
l Make sure no objects fall into the machine.
l If any problem occurs that can not be solved by the procedures de-
scribed in this manual make sure you contact the technical service.
l Follow the recommended maintenance procedures regularly.
Used cartridges may be taken back by the technical service station as a
part of the maintenance procedures.
1-10
General Information
Di 150f