Removing The Fork Protector; Installing The Fork Protector; Removing The Front Fender; Installing The Front Fender - KTM 125 EXC EU 2010 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing the fork protector

11.27

Installing the fork protector

11.28

Removing the front fender

11.29

Installing the front fender

11.30
(XC)
–
Position the brake line. Put on the clamp and mount and tighten screws
–
Install the front wheel.
x
–
Remove the fork legs.
–
Remove screws
–
Remove the screws on the right fork leg. Lift off the fork protector.
500105-10
x
–
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
–
Install the fork legs.
500105-10
–
Remove screws
–
Make sure the spacers remain in place.
500092-10
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
Info
Make sure the holding lugs engage in the start number plate.
500092-10
( p. 67)
x
( p. 49)
x
on the left fork leg. Lift off the fork protector.

M6
M6
( p. 50)
x
. Remove the front fender.

M6
.

.

10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
.

10 Nm (7.4 lbf ft)
51