Checking The Gear Oil Level; Changing The Gear Oil - KTM 125 EXC EU 2010 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Checking the gear oil level

11.106
Info
The gear oil level must be checked when the engine is cold.

Changing the gear oil

x
11.107
–
Place a cloth beneath the carburetor to soak up emerging fuel.
–
Remove plug
–
Completely drain the fuel.
–
Mount and tighten the plug.
B00047-10
–
Stand the motorcycle upright on a horizontal surface.
(All 125/150/200 models)
–
Remove gear oil level check screw
–
Check the gear oil level.
A small amount of gear oil should flow out of the hole.
» If no gear oil flows out:
–
Add gear oil.
–
Mount and tighten the gear oil level check screw.
Guideline
B00049-10
Screw, gear oil level check
(All 250/300 models)
–
Remove gear oil level check screw
–
Check the gear oil level.
A small amount of gear oil should flow out of the hole.
» If no gear oil flows out:
–
Add gear oil.
–
Mount and tighten the gear oil level check screw.
Guideline
B00050-10
Screw, gear oil level check
–
Drain the gear oil.
400721-01
–
Refill with gear oil.
400722-01
.

.

( p. 90)
x
.

( p. 90)
x
( p. 89)
x
( p. 89)
x
M6 10 Nm
(7.4 lbf ft)
M6 10 Nm
(7.4 lbf ft)
88