SERVICE SCHEDULE
S10A
Check exhaust con-
trol for functioning
•
and smooth opera-
tion, clean.
x
Change the
crankshaft main
bearing.
x
Change the conrod
bearing.
x
Check the transmis-
sion.
x
Check the shift
mechanism.
x
S10A: every 10 operating hours
S40A: every 40 operating hours
S20A: every 20 operating hours
S60A: every 60 operating hours
S80A: every 80 operating hours
S20N: once after 20 operating hours
S30A: every 30 operating hours
J1A: annually
Important checks and maintenance work to be carried out by the rider
10.3
Check the gear oil level. (
Check the front brake fluid level. (
Check the rear brake fluid level. (
Check the front brake linings. (
Check the rear brake linings. (
Check and adjust the cables.
Bleed the fork legs. (
p. 47)
Clean the dust boots of the fork legs. (
Clean the chain. (
p. 54)
Check the chain tension. (
Check chain wear. (
p. 55)
Check the rear sprocket/engine sprocket for wear. (
Clean the air filter.
(
p. 82)
x
Check the tire air pressure. (
Check the tire condition. (
Check the coolant level. (
Empty the carburetor float chamber.
Check all controls for smooth operation.
Check braking.
Check all screws, nuts and hose clamps regularly for tightness.
NB1A: Depending on conditions of use according to requirements.
Competition use
S20A
S40A
S80A
•
•
•
•
•
•
•
•
•
•
p. 88)
p. 59)
p. 63)
p. 60)
p. 64)
p. 47)
p. 55)
p. 55)
p. 70)
p. 69)
p. 77)
(
p. 87)
x
Hobby use
S20A
S40A
S60A
S80A
•
•
•
S10A
S20N
S30A
•
•
•
•
•
37
J1A
NB1A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•