Setting The Clock; Adjusting Speedometer Functions - KTM 125 EXC EU 2010 Owner's Manual

CONTROLS (ALL EXC/XC-W MODELS)

Setting the clock

6.5

Adjusting speedometer functions

6.6
Info
In its condition at delivery, the display mode SPEED/H and SPEED/ODO is activated.
–
Press the button
The settings are stored and the setup menu is closed.
Info
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the setup menu
closed.
Condition
The motorcycle is stationary.
–
Press the button
the display.
–
Press the button
The hour display flashes.
–
Set the hour display with the button
–
Press the button
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
400330-01 the button
Info
The seconds can only be set to zero.
–
Press the button
The settings are stored and the setup menu is closed.
Info
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the setup menu
closed.
Condition
The motorcycle is stationary.
–
Press the button
display.
–
Press the button
The setup menu is displayed and the active functions shown.
–
Switch to the function you require by briefly pressing the button
The selected function flashes.
Activating a function
–
Press the button
400318-01
The icon remains in the display and the display changes to the next func-
tion.
Deactivating a function
–
Press the button
The icon disappears from the display and the display changes to the next
function.
–
Activate or deactivate all functions accordingly
–
Press the button
The settings are stored and the setup menu is closed.
for 3 - 5 seconds.
briefly and repeatedly until CLK appears at the bottom right of
for 3 - 5 seconds.
and/or button
briefly.
and the button .
for 3 - 5 seconds.
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
.
.
for 3 - 5 seconds.
16
.
.