Table of Contents
Advertisement
Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
3.2
Connecting Ethernet Media
support all standard Ethernet media types within a single Switch unit. This is
accomplished by using a family of different port Modules which can be
individually selected and configured per-port. See Section 2.4 for a description
of the PMs.
The various media types supported along with the corresponding IEEE
802.3 and 802.3u standards and connector types are as follows:
IEEE Standard
Fiber:
1000BASE-FX
100BASE-FX
small form factor
small form factor
Copper:
10BASE-T
100BASE-TX
1000BASE-TX
3.2.1
Connecting Fiber Optic ST-type, "twist-lock"
The following procedure applies to installations using a PM with ST-type fiber
connectors. This procedure applies to ports using a 6K32F Series module, MST-
type port.
1.
Before connecting the fiber optic cable, remove the protective dust caps from the
tips of the connectors on the PM. Save these dust caps for future use.
2.
Wipe clean the ends of the dual connectors with a soft cloth or lint-free lens tissue
dampened in alcohol. Make certain the connectors are clean before connecting.
Note:
bands at regular intervals; you must use the color-coded strand on the
associated ports at each end of the fiber optic segment.
3.
Connect the Transmit (TX) port (light colored post) on the Magnum PM to the
Receive (RX) port of the remote device. Begin with the color-coded strand of
the cable for this first TX-to-RX connection.
www GarrettCom com
.
The Magnum 6K32F Series Switches are specifically designed to
Media Type
Multi-mode
Single-mode
Multi-mode
Single-mode
Multi-mode
Single-mode
twisted pair
twisted pair
One strand of the duplex fiber optic cable is coded using color
.
Max. Distance
220m ( ft)
70km
2.0km (6,562 ft)
18.0km (95K ft)
2.0km (6,562 ft)
15 km
100m (328 ft)
100m (328 ft)
27
Port Module
GBIC-SXSC
GBIC-ZXSC
6KP6-RJMSC, -RJMST
-RJSSC, -RJSSCL
6KP8-MTRJ, -MLC
6KP8- SLC
6KP8-RJ45
GBIC-TP
Hide quick links:
Advertisement
Table of Contents
