GarrettCom Magnum 6K32F Installation And User Manual page 8

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
Maximum Standard Gigabit Ethernet Segment Lengths:
1000BASE-T (CAT5E or higher is recommended)
1000BASE-SX, full-duplex, multi-mode(62.5μm cable)
1000BASE-SX, full-duplex, multi-mode(50μm cable)
1000BASE-LX, full-duplex, single-mode(9μm cable)
Fiber connector types supported:
ST-type (twist-lock)
SC-type (snap-in)
MTRJ-type Small Form Factor (SFF)
LC-type Small Form Factor (SFF)
GBIC modules
LEDs: Per Port
LK: Steady ON when media link is operational
ACT: ON with receiver port activity
FDX/HDX: ON = Full-Duplex Mode
100/10: ON = 100Mbps speed
Operating Environment
UL 60950 "Component Parts" temp. ratings: 140° F (60°C)
IEC 60068 "Type Test" ratings:- -40°to 185°F (-40°to 85°C)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Altitude: -200 to 13,000 ft. (-60 to 4000m)
Conformal Coating (Humidity Protection) option: Request quote
Packaging
Enclosure: Rugged High strength metal. Suitable for stand-alone
or rack-mounting
Dimensions: 1.70in. H x 17.0in. W x 9.0in. D
4.32cm H x 43.2cm W x 22.9cm D
Cooling method: Fan cooled, @ 25 cfm ea.
Management Console connector
DB-9 for RS-232 " null-modem" cable (sometimes called an X-modem cable)
Power Supply (Internal)
AC Power Connector: IEC-type, male recessed at rear of chassis,
Input Voltage: 100 to 240 VAC (auto-ranging)
Input Frequency: 47 to 63 Hz (auto-ranging)
Power Consumption: 60 watts max (fully-loaded with fiber modules)
Fuse required for replacement- 1 Amp
DC Power Supply (Options)
-48VDC Power Input Voltage : -36 to -70 VDC
Fuse Required – 2 Amps
24VDC Power Input Voltage : 20 to 40VDC
www GarrettCom com .
OFF = Half-Duplex Mode
OFF = 10 Mbps
with adjacent manual ON-OFF switch (optional if no Alarms Cont.)
30 watts max (fully-loaded copper only modules)
.
2
- 100 m
- 220m
- 550m
-5Km