1B 6Kp4-F10St Multi-Mode Fx-St "Twist Lock" Module; 1C 6Kp4-Flstfx Multi-Mode Fx-St "Twist Lock" Module - GarrettCom Magnum 6K32F Installation And User Manual

Industrial managed switch
Hide thumbs Also See for Magnum 6K32F:
Table of Contents

Advertisement

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
connector functions as a fiber optic transceiver to support 10BASE-FX network
segments. When installed in a Magnum 6K32F Series Managed Switch, the copper port
supports the standard distance 100m on each port and the fiber port supports fiber optic
cable distances up to the IEE E-standard 10Mbps distance limits, i.e., typically 2km at
full-duple
x and half-duplex.
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED that indicates proper connectivity with the remote device when lit, and
FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). Th e
10/100 LED indicates the speed, 100Mbps if the LED is ON, 10Mbps
5
.2.1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST "twist lock" Module
The Magnum 6KP4-F10ST is a
10Mb multi-mode fiber module
with 4 ST-Fiber ports. All four
fiber ports are ST connectors
and configured as 10Mb Half-
duplex by default. The 10Mb
ST-fiber ports allow the user to
connect their legacy 10Mb
network to the Magnum 6K3
Series switch. They also prov
a convenient way for the half
duplex hub to connect to the switch through 10Mb fiber ports. It supports distances
according to the 10Base-FL standard i.e, 2Km distance for mu
m
ode for
10Km distance may be available as a special order).
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED indicating proper connectivity with the remote device when li
F
DX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
5.2.1c
6KP4-FLSTFX, 2@10Mb and 2@100Mb multi-mode FX-ST "twist
lock" Module
The Magnum 6KP4-FLSTFX is a combo fiber module with two 10Mb + two
100Mb multi-mode fiber module for a total of 4 ST-Fiber ports. All four fiber ports
ST connectors and configured as 10Mb Half-duplex by default for 10Mb fiber and
100Mb Full duplex for the 100Mb fiber. The 10Mb ST-fiber ports allow the user to
connect their legacy 10Mb network to the Magnum 6K32F Series switch. They also
www GarrettCom com
.
2F
ide
.
lti-mode fiber. (Single-
49
if it is OFF,.
t, and
are

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents