Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
traffic is not affected by PoE.
LINK and ACTIVITY LEDS are combined
t
hat is marked as LINK/ACT, as shown in the diagram
PoE ED
L
s Summary
•
For P
oE devices, each RJ-45 PoE port supports only 802.3af complaint
devices. The PoE LED is ON when the attached PD is drawing power from th
port.
•
For non-PoE devices connected, the PoE port will act as a normal RJ-45 port
and the PoE LED is OFF. No power is being sent out from the port.
•
The PoE ports in Magnum 6K's with 48VDC power input act as a pass-
through, so the 48VDC
to the 6K switch and to all the 8 RJ-45 ports with PD devices connected (up to
15 watts per PoE port).
•
In the case where the 48VDC power in not internally connected and no po
is coming to the PoE port
simultaneously to indicate a trouble condition. The ports will still operate
properly for data traffic.
5
.2.11
6KP8-45-2MT, 6
FX , MTRJ Small-Form-F
The Magnum 6KP8-
45-2MT eight port Module is a
combo module with copper a
fiber (Small Form Factor)
MTRJ type ports. The small
sizes of MTRJ connectors give
an advantage of placing more
fiber ports on one module. T
6KP8-45-2MT is equipped
with six 10/100 RJ-45 ports
and two 100Mb MTRJ fiber
ports. When installed in a Magnum 6K32F Series Switch, it supports the standard
distances as mentioned on 5.2.3. and the LEDs also act similarly.
www GarrettCom com
.
power source
s for some reas
@ 10/
100Mbps RJ-45 and 2@100Mb multi-mode
actor
nd
he
.
on the PoE modules into one LED
.
must be strong enough to provide power
on, all the PoE port LEDs are ON
57
e
wer