3.2
PIP (Picture in Picture) Function
When OSD Menu is disabled, it cycles through the available PIP display modes.
Repeated keystrokes will change the size of the PIP display to side-by-side (PAP)
display, and then back to normal display.
When OSD Menu is enabled, press"
closes the OSD if pressed at the Menu level.
3.3
Auto Adjustment Function
When OSD Menu and PIP is disabled, press"
Adjustment.
When PIP is enabled, it switches the image in the Main Display to the PIP Display
and vice versa by pressing again. When image side-by-side (PAP mode) is active,
the SWAP key (
3.4
Source Function
When OSD Menu is disabled, press "
sources for the Main Display.
When OSD Menu is enabled, it moves right when navigating the Menu and Sub
Menu and increments a slider bar.
3.5
OSD Menu Function
After the power on, press"
" returns to the previous menu level or
) exchanges the left and right displays.
" to enter OSD Menu.
15
" will perform the screen Auto
" will cycle through the available input
FPM-8192V/8232V User Manual