Tools - Strong SRT 8105 ECO User Manual

7.3.7 favourite
This menu allows you to personalize the names of the 8 available favourite lists.
Use p/q to select Favourite from the System Setup Menu and press Ok to proceed. The names of
all groups are now displayed. Select the desired favourite group with p/q and press Ok to edit its
name. A text field will now pop up at the right of the screen. Use t/u p/q to select the desired
characters and enter them with Ok. Once you have finished editing, press blUE to save the changes.
Once all changes are made, press EXIT twice.
7.3.8 Auto Standby
Auto Standby is a new feature that helps you with reducing power consumption. When set to On, the
receiver will turn to standby if it doesn't receive any commands for three hours. Set Auto Standby to
Off to avoid the automatic switch down.

7.4 Tools

Press mEnU in viewing mode to enter the Main Menu.
Select the Tools submenu with p/q and press Ok or u to enter.
Use p/q to highlight the desired submenu and press Ok proceed.
Press EXIT to leave.
7.4.1 Receiver Information
This submenu shows receiver specific information such as hardware version and software version.
It also displays our web address www.strong.tv. Please have the Receiver Information screen on hand
when you call our hotline. The person who answers your call might ask for the information given in
this screen.
7.4.2 load factory Setting
This option allows you to reset the receiver to factory settings, which clears all stored channels.
WARnIng:
Use p/q to select "Load Factory Setting" in the Tools menu and press Ok. You are asked to input
password.
Input the correct password using the 0~9 buttons (default: 0000). A confirmation window is
displayed.
Select Yes to return to factory settings. Select No to cancel.
Press EXIT to leave.
7.4.3 S/W Upgrade by OTA
This receiver is equipped with an Over The Air software upgrade option. An Over The Air update
might not be available in your region. Please visit our website www.strong.tv or contact your local
service hotline for more information about this option.
14
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
PART 1 • English