Games; Media - Strong SRT 8105 ECO User Manual

PART 1 • English
7.4.4 Upgrade by USb
This feature allows you to upgrade your receiver's software via the USB port. If new software is
available for your receiver, it can be downloaded from our website www.strong.tv.Place the software
file (unzipped) in the root directory of your USB storage device (HDD, memory stick etc.) and insert
this device into the USB port of the receiver.
Select Upgrade by USB from the Tools menu and press Ok to proceed.
The upgrade menu will now be displayed.
Use p/q to select Upgrade Mode and choose option Allcode.
Use p/q to select Upgrade File and choose the file containing the new software.
Once all settings are made, move the highlight to Start and press Ok to start the upgrade process.
After a few seconds, the receiver asks: "Are you sure to burn flash?". Select Yes to finalize the upgrade
or No to quit without upgrading.
WARnIng:
7.4.5 Remove USb device safely
Select Remove USB device safely from the tools menu and press Ok. The receiver will display a
message indicating that you can safely remove your storage device from the receiver.
nOTE:

7.5 games

Your receiver is equipped with two games which can be played on your TV screen using the receiver
remote control.
Use p/q to select Game from the Main menu and press Ok or u to proceed.
Select one of the available games (Othello or Sudoku) using p/q and press Ok to start the game.
Follow the directions on screen.
Use EXIT to quit a game.

7.6 media+

The Media+ menu consists of the following submenus: Media Player, Record Manager, DVR HDD
Information, HDD Format, DVR Configuration and Jump.
Use p/q to highlight the desired menu and press Ok to enter.
Press EXIT to quit.
7.6.1 media Player
This function allows you to play MPEG, AVI, MP3, JPG many other type files from connected storage
device (see details in technical part).
Select Media Player from the Media+ menu and press Ok to proceed.
After an update the receiver restarts automatically. During the upgrade
process NEVER disconnect the receiver from the mains or switch off the
power! Doing so might damage your receiver and will void warranty!
After performing this function, the USB device is no longer accessible from
your receiver. To gain access to your storage device again, re insert it or switch
the receiver to standby and on again.
15