Hdd Format - Strong SRT 8105 ECO User Manual

Use p/q browse the connected USB device and use Ok to open maps. Press Ok to play the
highlighted selection.
The help banner at the bottom of the screen explains all buttons used in the Media player. Press EXIT
to quit.
nOTE:
7.6.2 Record manager
The Record Manager gives you access to previously recorded events.
Select Record Manager from the Media+ menu and press Ok to enter.
Use p/q to highlight the recording you wish to play and press Ok start playback.
Press EXIT to exit.
During playback, it is possible to perform the following actions:
2
u
ff/REW
RED
When the timer banner is on screen (activated by pressing u or InfO), the following actions are
possible:
t/u and press Ok to jump forwards and backwards in time during playback.
1 = Set marker point in play back, press again to delete marker point.
2 = Jump to next marker point.
3 = Jump forwards in time. (See details in 7.6.5 DVR Configuration under Step to)
nOTE:
7.6.3 DvR HDD Information
This option shows relevant information about the connected USB device.
Select DVR HDD Information from the Media+ menu and press Ok to enter.
Press EXIT to leave.

7.6.4 HDD format

The HDD format menu allows you to format the connected USB device.
WARnIng:
Select HDD Format from the Media+ menu and press Ok to enter. Use t/u to select the partition
you wish to format (Partition 1 is set per default) and press q to highlight Format. Press Ok to
proceed, select FAT or Cancel, or press EXIT to leave without formatting.
nOTE:
16
You can also access the Media Player from viewing mode with the fIlE key on
the remote control.
To pause the playback.
To resume playback.
For fast forward or fast rewind during playback.
Press to stop playback and return to Record Manager.
You can also access the Record Manager from viewing mode with the RED
key on the remote control. The help banner at the bottom of the screen
explains all buttons used in this record manager to edit. Press EXITE to save
the settings and quit the menu.
Formatting will permanently delete ALL data stored on the connected device.
Please make a backup copy of all data you wish to keep before entering the
HDD Format menu. STRONG cannot be held responsible for loss of data
from USB devices used with this receiver.
It is possible to use already NTFS formatted USB disks.
PART 1 • English