Connecting A Usb Storage Device; Starting Up For The First Time - Strong SRT 8105 ECO User Manual

3.7 Connecting a USb storage device

nOTE:
For proper functioning of Time Shift and recording functions, a fast USB device (such as a hard
disk drive) is needed. Interrupted playback or a distorted picture during playback or Time Shift are
indications for a low device speed. STRONG cannot guarantee proper functioning of recoding and or
Time Shift functions with all USB devices.

4.0 STARTIng UP fOR THE fIRST TImE

If you use your receiver for the first time, the Welcome "Easy install" menu appears. Use p/q to
move the highlight to the setting you wish to alter and use t/u to change values.
Start by selecting your language using t/u. Once you have selected your language, press q to move
to the highlight next item and use t/u to change.
Language:
Region:
Subtitle:
Aspect Mode:
Scan mode:
Connection:
Once all settings are made, move the highlight to OK and press Ok to continue.
The receiver will now advance to the Aerial Adjustment screen.
This part of the wizard is of great help when setting up your antenna system.
Use p/q to move the highlight to the setting you wish to alter and use t/u to change values. The
following settings are available:
Antenna Power:
Beeper:
Channel No.:
Once all settings are made, press Ok to start scanning.
The receiver will now search for all available channels. Once scanning is finished, the receiver
switches to viewing mode.
6
We recommend the use of a hard disk drive USB 2.0 or higher for recording
and play back of TV events.
Select your language.
Select your region where this receiver is used.
Select Normal to display subtitles per default, Select Hard of Hearing to show
HoH subtitles per default. Select Off to hide subtitles per default.
Use this option to select the aspect ratio of your TV and the preferred
conversion method. Options are: Auto (automatic detection of aspect ratio),
4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),
4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and 16:9
(use this setting for 16:9 TV sets).
Select All to store scrambled and free to air channels or select Free to store
only free to air channels. Note: Scrambled channels you cannot watch with
this receiver.
Use this option to select the connection to your TV set. Select HDMI or
SCART. If you are using a cinch cable then this selection is not important.
Set to On if you use an active antenna. When set to On, 5 V will be present on
the ANT IN connector of the receiver. Select Off for passive antennas.
Select On for an audible indication of signal reception. Off turns the beeper
off.
Select a channel that is known to carry a broadcast in your region. The Signal
Strength and Signal Quality bars give a visual indication of the reception.
Adjust your antenna to obtain maximum signal strength and quality.
PART 1 • English
Fig. 5