Bandwidth Utilization - ZyXEL Communications GS1900 Series User Manual

Chapter 7 Monitor: Port
Table 24 Monitor > Port > Port > Port Counters (continued)
LABEL
etherStatsPkts256to511Octets
etherStatsPkts512to1023Octets
etherStatsPkts1024to1518Octets

7.2.3 Bandwidth Utilization

Utilization is the percentage of a network's bandwidth that is currently being consumed by network
traffic. Each vertical bar represents the highest utilization on a port, and can be either transmitted
(Tx) traffic or received (Rx) traffic during the last time interval in seconds.
Use this screen to view the Switch's bandwidth utilization settings. Click Monitor > Port > Port >
Bandwidth Utilization to access this screen.
Figure 35 Monitor > Port > Port > Bandwidth Utilization
Each field is described in the following table.
Table 25 Monitor > Port > Port > Bandwidth Utilization
LABEL
Port Bandwidth
Utilization
1Gbps
100Mbps
10Mbps
Link down
Refresh period
IFG
Tx
Rx
54
DESCRIPTION
This field displays the 1Gbps.
This field displays the 100Mbps.
This field displays the 10Mbps.
This field displays the link down.
This field displays the refresh period.
This field displays the IFG.
Transmitted (Tx) traffic during the last time interval in seconds.
Received (Rx) traffic during thetime interval in seconds.
DESCRIPTION
This field displays the etherStatsPkts256to511Octets.
This field displays the etherStatsPkts512to1023Octets.
This field displays the etherStatsPkts1024to1518Octets.
GS1900 Series User's Guide