Chapter 30 Configuration: Management
Table 167 Configuration > Management > Error Disable
LABEL
POE Inline
Power
Apply
Cancel
30.5 HTTP/HTTPS
30.5.1 The HTTP Screen
Use this screen to configure the HTTP settings. Click Configuration > Management > HTTP/
HTTPS to open this screen.
Figure 186 Configuration > Management > HTTP/HTTPS
The following table describes the labels in this screen.
Table 168 Configuration > Management > HTTP/HTTPS
LABEL
HTTP
State
Authentication
Method
Session Timeout Enter the session timeout value. The timeout can be between 0 and 86400 minutes.
Apply
Cancel
202
DESCRIPTION
Select an option to Enable or Disable the POE Inline Power.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Select the HTTP mode operation.
Possible modes are:
•
Enabled: Enable HTTP mode operation.
•
Disabled: Disable HTTP mode operation.
Select the authentication method from the dropdown list.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide