ZyXEL Communications GS1900 Series User Manual page 101

Table 64 Configuration > Port > PoE > PoE> Edit (continued)
LABEL
PD Priority
Apply
Cancel
GS1900 Series User's Guide
DESCRIPTION
This field is not available for the SFP or SFP+ ports.
When the total power requested by the PDs exceeds the total PoE power budget on the
Switch, you can set the PD priority to allow the Switch to provide power to ports with higher
priority.
Select Critical to give the PD connected to this port the highest priority.
Select High to set the Switch to assign the remaining power to the port after all critical
priority ports are served.
Select Low to set the Switch to assign the remaining power to the port after all critical and
high priority ports are served.
Click Apply to save the changes.
Click Cancel to discard the changes.
Chapter 18 Configuration: Port
101