Error Disable - ZyXEL Communications GS1900 Series User Manual

Chapter 16 Monitor: Management
Each field is described in the following table.
Table 52 Monitor > Management > Syslog
LABEL
Logging Filter Select
Target
Severity
Available
Acting
>
<
View
Clear
Show System Log
No.
Timestamp
Category
Severity
Message

16.3 Error Disable

This link takes you to a screen where you can view CPU protection and error disable recovery.
Use this screen to view Switch global and port error disable management. Click Monitor >
Management > Error Disable to access this screen.
88
DESCRIPTION
Select Buffered or Flash.
Buffered: Login saved to temporary memory.
Flash: Login saved to permanent memory.
This field displays two options: Available and Acting.
Severity type: crit, emerg, alert, error, warning, notice, info, and debug.
Click < to move a severity type from the acting box to the available box.
Click > to move a severity type to the acting box from the available box.
Click < to move a severity type from the acting box to the available box.
Click > to move a severity type to the acting box from the available box.
Click > to move a severity type to the acting box from the available box.
Click < to move a severity type from the acting box to the available box.
Click View to display results.
Click Clear to clear results.
The syslog protocol allows devices to send event notification messages across an IP
network to syslog servers that collect the event messages. A syslog-enabled device can
generate a syslog message and send it to a syslog server
This field displays the number you are viewing.
This field displays the timestamp.
This field displays the category.
This field displays the severity.
The syslog protocol allows devices to send event notification messages across an IP
network to syslog servers that collect the event messages. A syslog-enabled device can
generate a syslog message and send it to a syslog server.
GS1900 Series User's Guide