The Med Network Policy Screen; The Med Network Policy Add/Edit Screen - ZyXEL Communications GS1900 Series User Manual

Table 121 Configuration > LLDP > Local Information > Edit (continued)
LABEL
Location ECS
ELIN
Apply
Cancel

26.2.6 The MED Network Policy Screen

Use this screen to view the MED Network Policy settings. Click Configuration > LLDP > MED
Network Policy to open this screen.
Figure 140 Configuration > LLDP > MED Network Policy
The following table describes the labels in this screen.
Table 122 Configuration > LLDP > MED Network Policy
LABEL
Network Policy Configuration
Add
No.
Application
VLAN ID
VLAN Tag
L2 Priority
DSCP Value
Modify
Edit
Delete

26.2.7 The MED Network Policy Add/Edit Screen

Use this screen to configure the Port Edit settings. Click Configuration > LLDP > MED Network
Policy > Add/Edit to open this screen.
GS1900 Series User's Guide
DESCRIPTION
Emergency Call Service (e.g. E911 and others), such as defined by TIA or NENA.
Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as
used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. This
format consists of a numerical digit string, corresponding to the ELIN to be used for
emergency calling.
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Click Add to create a new Network Policy Configuration entry.
Displays index of network policy.
Displays the Application type indicating the primary function of the application(s).
Displays the VLAN ID (VID) for the port as defined in IEEE 802.1Q-2003.
Displays the VLAN Tag value as Tagged or Untagged.
Displays the L2 priority layer value.
Displays the DSCP Value.
Click Edit to make changes to the entry.
Click Delete to remove the entry.
Chapter 26 Configuration: LLDP
161