ZyXEL Communications GS1900 Series User Manual page 39

Figure 22 Getting Start > Start up > 3 Step 3 Finish
Each field is described in the following table.
Table 12 Getting Start > Start up > 3 Step 3 Finish
LABEL
Host Name
IP Address
Subnet Mask
Gateway
DNS
NTP(Network Time
Protocol)
Username
Password
Previous
Finish
VLAN
In VLAN, you can create VLAN, tag VLAN setting, and view finished results.
In order to create VLAN, please do the following. Click Getting Start > VLAN > 1 Step 1 Create
VLAN to access this screen.
GS1900 Series User's Guide
DESCRIPTION
This field displays a host name.
The Switch needs an IP address for it to be managed over the network. The factory
default IP address is 192.168.1.1.
The subnet mask specifies the network number portion of an IP address.
The factory default subnet mask is 255.255.255.0.
Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
This field displays the NTP time servers from which the Switch gets the time and date.
The default username is admin and associated default password is 1234.
The default username is admin and associated default password is 1234.
Click Previous to show the previous screen.
Review the information and click Finish to create the task.
Chapter 5 Getting Start
39