Chapter 25 Configuration: Spanning Tree
Table 113 Configuration > Spanning Tree > MST (continued)
LABEL
VLAN Count
Priority
Modify
Edit
Delete
25.2.8 The Add/Modify MST Screen
Use this screen to configure the MST settings. Click Configuration > Spanning Tree > MST >
Add/Modify to open this screen.
Figure 132 Configuration > Spanning Tree > MST > Add/Modify
The following table describes the labels in this screen.
Table 114 Configuration > Spanning Tree > MST > Add/Modify
LABEL
MST Instance
MST ID
VLAN List
Priority
Apply
Cancel
25.2.9 The MST Port Screen
Use this screen to view the MST Port settings. Click Configuration > Spanning Tree > MST
Port to open this screen.
150
DESCRIPTION
Displays the VLAN count.
Displays the priority for each port here.
Click Edit to make changes to the entry.
Click Delete to remove the entry.
DESCRIPTION
Displays the Multiple Spanning Tree Instance (MSTI) ID(s).
Display a list of MSTI VLANs.
Displays MSTI bridge ID priority value.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide