ZyXEL Communications GS1900 Series User Manual page 33

Table 7 Configuration Menu Screens Summary (continued)
FOLDER OR LINK
PoE
Bandwidth
Management
Storm Control
VLAN
VLAN
Guest VLAN
Voice VLAN
MAC Table
Link Aggregation
Loop Guard
Mirror
Multicast
IGMP
Spanning Tree
GS1900 Series User's Guide
TAB FUNCTION
This link takes you to a screen where you can configure the Switch
to supply power over Ethernet.
Bandwidth Control Configure egress global burst and port rate.
Port Configure port settings.
This link takes you to screens where you can configure VLAN,
guest VLAN, and voice VLAN settings.
VLAN Configure VLAN settings.
Port Configure port settings.
VLAN Port Configure VLAN port settings.
Global Configure global settings.
Port Configure port settings.
Global Configure global settings.
OUI Configure OUI settings.
Port Configure port settings.
This link takes you to a screen where you can configure the MAC
address and VLAN ID of a device attach to a port. You can also
configure what kind of MAC address it is.
Static MAC This link takes you to screens where you can configure static MAC
addresses for a port. These static MAC addresses do not age out.
Filtering MAC This link takes you to a screen to set up filtering rules.
Dynamic Age Configure dynamic learned and MAC address information.
This link takes you to screen where you can logically aggregate
physical links to form one logical, higher-bandwidth link.
Global Configure global settings.
LAG Management Configure LAG management settings.
LAG Port Configure LAG port settings.
LACP Port Configure LACP port settings.
This link takes you to a screen where you can configure protection
against network loops that occur on the edge of your network.
Global Configure global settings.
Port Configure port settings.
This link takes you to screens where you can copy traffic from one
port or ports to another port. Thus, allowing you to examine the
traffic from the first port without interference.
This link takes you to screen where you can configure various
multicast features, IGMP snooping and create multicast VLANs.
Global Configure global settings.
Vlan Configure Vlan settings.
Router Port Configure router port settings.
Profile Configure profile settings.
Throttling Configure throttling settings.
This link takes you to screens where you can configure the RSTP/
MRSTP/MSTP to prevent network loops.
Global Configure global settings.
Chapter 4 The Web Configurator
33