Figure 160 Configuration > Security > 802.1X > Port > Edit
The following table describes the labels in this screen.
Table 142 Configuration > Security > 802.1X > Port > Edit
LABEL
802.1X Port Edit
Port List
Port State
Reauthentication
State
Reauthentication
Period
Quiet Period
Supplicant Period
Maximum
Request Retries
Apply
Cancel
28.5 DoS
28.5.1 The Global Screen
Use this screen to view the Global settings. Click Configuration > Security > DoS > Global to
open this screen.
GS1900 Series User's Guide
DESCRIPTION
Displays the port index value.
Displays the Trust status as enabled or disabled.
Specify if a subscriber has to periodically re-enter his or her username and password to
stay connected to the port. Select Enable to activate feature.
Specify how often a client has to re-enter his or her username and password to stay
connected to the port.
Display the time out period to transmit request after receiving a rejection from the sever.
Display the time out period to transmit a request when the client does not responsed.
Enter the maximum number of request retries.
Click Apply to save the changes.
Click Cancel to discard the changes.
Chapter 28 Configuration: Security
181