The Local Information Edit Screen - ZyXEL Communications GS1900 Series User Manual

Gs1900 series gbe smart managed switch
Hide thumbs Also See for GS1900 Series:
Table of Contents

Advertisement

Chapter 26 Configuration: LLDP
Table 120 Configuration > LLDP > Local Information (continued)
LABEL
Capabilities
Supported
Capabilities
Enable
Port ID Subtype
MED Port Location
Edit
Port
Coordinate
Civic Address
ECS ELIN

26.2.5 The Local Information Edit Screen

Use this screen to configure the Port Edit settings. Click Configuration > LLDP > Local
Information > Edit to open this screen.
158
DESCRIPTION
Capabilities Supported describes the neighbor unit's capabilities. The possible
capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is disabled,
the capability is followed by (-).
Displays which capability is enabled.
Displays the Port ID Subtype.
Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Displays the index number of the LLDP port(s).
Displays the location coordinate of the LLDP port(s).
Displays the location of the civic address(es) in hexadecimal.
Emergency Call Service (e.g. E911 and others), such as defined by TIA or NENA.
Emergency Call Service ELIN identifier data format is defined to carry the ELIN identifier as
used during emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. This
format consists of a numerical digit string, corresponding to the ELIN to be used for
emergency calling.
GS1900 Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs1900-8Gs1900-8hpGs1900-16Gs1900-24e

Table of Contents